Tie Line Features; Outside (Co) Line And Tie Line Connection - Panasonic KX-TD500 Features Manual

TIE Line Features

3.1 TIE Line Features

Outside (CO) Line and TIE Line Connection

Description
TIE lines are usually used to link two or more distant locations where high volume calling
traffic exists. However, a person at a location outside of the TIE Line Network can also use it
by first making a CO call via public network to the nearest point of TIE Line Network for the
purpose of saving the toll call charge.
1. When a caller makes a CO call via DISA line
Local
Branch
Employee-1
Call Flow
1.
Employee-1 at a local branch makes a CO call to PBX-1 via DISA line.
2.
Employee-1 dials "77" (TIE Line Access Code).
3.
Employee-1 dials 951-1000.
4.
Employee-1 at a local branch will be connected to Ext.1000 of PBX-2.
Programming example:
To make up the TIE Line Network above, the following System Programming is required at
PBX-1 and -2 respectively.
PBX-1
• 2.7 Trunk to Trunk Restriction
• 8.2 TIE Routing Table
– PBX Code: 950
370
PBX-1
TG10
DISA
CO
PBX Code 950
Inside of the TIE Line Network
PBX-2
TIE Line
TG10
PBX Code 951
Ext. 1000
Features Guide