Recorder Title & Camera Titles; E-Mail Setup - Mitsubishi Electric DX-TL5000EZ User Manual

4 . If you want to make a new registration, left-click
-3
"register." If you want to cancel a new registration, left-
click "clear."
4 . (If you have selected "register" • • • )
-4
It will be added to "Change authorities of users."
4 . (If you have selected "clear" • • • )
-5
Clears the specified contents.
5 . (To change the access method settings • • • )
-1
Select the item to be changed in the "Access Mode
Setup."
• Use SSL for Web Access:
Sets the level of the encoding function (SSL).
"No SSL": Does not use the encoding function.
"Menus only": Uses the encoding function for the
menus only.
"Menus + Pictures": Uses the encoding function for
the menus and pictures.
• SSL Port Settings:
Sets the port number used for SSL communication.
• Band-Width Limit:
Controls the band width of the communication.
When you use SSL, the following message appears.
Select "Yes" and then continue the operation.
When displaying live or playback picture while "Use SSL
for Web Access" is set to "Menus only," the following
message appears. Select "Yes" to display the live or
playback picture.
In this case, the key-shaped icon which shows the encoded
communication of the browser is not displayed, however,
communication is carried out with encoded.
5 . Set the desired setting in "New Settings" and then select
-2
"change" and left-click.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Communications by Web Browser
Recorder Title & Camera Titles
This is the screen for setting or changing the recorder and the
camera titles.
1. Select "Recorder Title & Camera Titles" and left-click.
• The "[Recorder Title & Camera Titles]" screen
appears.
2. Enter the desired recorder or camera title to "New Text."
• The recorder and the camera titles currently set are
shown in the "Current Text."
3. Select "change" and left-click.

E-mail Setup

This is the screen for setting the information related to the e-
mail server or sender, and for setting the e-mail address of the
receiver.
1. Select "E-mail Setup" and left-click.
• The "[E-mail Setup]" screen appears.
29