Frequently Asked Questions; Fault Messages - Miele PT 8507 Operating And Installation Instructions

Fault messages

,
Repairs to electrical, gas or steam appliances
should only be carried out by a Miele authorized
technician in accordance with local and national
safety regulations. Unauthorized repairs could
cause injury or machine damage. The manufactu-
rer cannot be held responsible for unauthorized
work.
After turning the machine on at the mains or if the
program list was selected the control carries out a
system analysis. All modules and their sensors, data
from the operating system, drying programs and
languages are checked.
If an error occurred in a program or language, they
are marked with § and can not be selected (here "3
Hot Wash / Cottons damp 20%" and "English").
1 Hot W. / Cot. extra - dry
2 Hot Wash / Cottons - dry
3 Hot Wash / Cottons damp 20%
Settings
Language
If an error occurs in an already selected language the
following will show:
Data fault
§
Limited function.
Language defect.
0%
0%
§
f
Back <-
Deutsch
English §
FC A
f

Frequently asked questions

Faults that occur before or after the start of a program
will flash in the display.
If the following error messages cannot be fixed with
five restarts, a general message will show:
System fault
§
Contact Technical Service
if restart w/o success.
If the display remains off, the dryer has no power.
^ Check the plug, the main switch and the fuses
on-site.
Fan fault
§
Program stop. Press Start.
Motor temperature too high.
^ Allow motor to cool.
Machine fault
§
Contact Technical Service
if restart does not work.
^ Contact Technical Service.
Drive motor fault
§
Motor power too high.
Continue: Press Start.
^ Allow motor to cool.
f
f
f
f
27