Start A Program; End Of Program - Miele PT 8507 Operating And Installation Instructions

7. Start a program

^ Press the "Start" button to begin the program..

8. End of program

2 Hot Wash / Cottons - dry
Program end
Anti-crease
m
The program end is shown in the display and the
buzzer sounds.
^ Open the drum door.
^ Remove the laundry.
If the laundry is not removed from the machine at the
end of the program an anti-crease cycle will automati-
cally start. The drum turns in intervals to minimize
creasing in the laundry.
,
The laundry must not be removed from the
dryer before the drying program has finished. The
cooling down phase must be completed.
If hot laundry items are stacked or packed they
could spontaneously combust.
^ Check the lint filter and clean if necessary.
Close lint filter flap, trip hazard.
2 Hot wash / Cottons - dry
Program end
Caution: Lint filter is clogged
A reminder will appear in the display when the filter
needs to be cleaned.
^ Clean the lint filter immediately after the program
ends.
^ Close the drum door.
^ Press the 0 "Off" button to turn off the machine.
^ Turn off power at the power mains (on site).
^ Close the on site gas or steam valve.
Drying
Finish at 12:35
FC K f
A
13