Control Elements - Miele PW 6207 Operating Instructions Manual

a

Control elements

a Display
1 Cottons
2 Cottons
3 Cottons intensive
i
After switching on the "Welcome" display will appear
for a short time followed by the programme list. The
most recently used programme is highlighted.
b Function buttons
The six buttons underneath the display are the
function buttons. These buttons have specific
functions depending on the status of the machine.
These functions will be listed in the display above the
buttons and will be highlighted once selected.
If the machine is reprogrammed to "Direct button
allocation" the first 6 programmes listed in the display
can be selected directly via these buttons.
c START button
The lightring will flash when a selected programme
can be started. Pressing the Start button will start the
programme. After a programme has started, pressing
this button will show the display as it was before the
start of the programme.
b
90 °C
60 °C
60 °C
FC A
Description of the machine
c d e
d PC / Optical interface
This interface is used for transferring data to the
control unit from a PC and vice versa.
e Rotary selector
Turning the selector brings up options and menus in
the display.
Pressing the selector confirms your selection.
f Chip card reader
When a chip card is inserted, the programmes on the
chip card can be used.
Insert the card in the direction of the arrow (on the
card).
g I Mains on switch
Switches the machine on.
h 0 Mains off switch
Switches the machine off.
i Emergency stop switch
Only for use in an emergency.
Press the red button to switch the machine off. After
the problem has been resolved, turn the red dial
clockwise to release it. Then press the Start button to
continue the interrupted programme.
f g h i
9