Getting Familiar With Your New Visio 22 - Samsung VISIO 22+ User Manual

Getting familiar with your new VISIO 22+

You have already learned how to position VISIO on your desk and you have
connected VISIO to the power supply.
You can slightly tilt the display so that you can comfortably view the screen.
Do not tilt too much; do not try to exceed the stopper position.
Now, switch on VISIO 22+ and use it for the first time.
The control panel is mounted right below the screen. The power button is
the leftmost one. A short press for about a second on the power button will
switch on VISIO 22+. As soon as the lights turn on, you may release the power
button. The Display may show a message "Invalid video mode", after a few
seconds VISIO shows a magnified image.
You can switch VISIO 22+ off by pressing the power button for more than a
second. Thus, touching this button accidentally will have no effect. Practice
switching on and off VISIO for a few times then leave it switched on to
proceed.
Place a document on the XY-table. Please use something coloured, like a
brochure or magazine with text and images.
You can align a document horizontally by moving it against the silver rim at
the back end of the XY-table. Thus you will track a line when moving the XY-
table left and right.
The XY-table provides a brake that can fix the table. At the front edge, you
find the brake lever. Put it in the leftmost position and you can move the XY-
table freely in all directions. In the middle position, you can move the XY-table
left and right only and the up down position is fixed. In the rightmost position
the table is fixed in all directions.
Now, align your document against the back rim and position the brake lever
in the leftmost position.
WARNING: Avoid having fingers or (pieces of) clothes jammed into the
mechanism of the XY-table underneath the reading platform. Please put your
hands on top of or on the front side of the reading platform. Do not reach
underneath the sides or underneath the rear side of the reading table.
8