Panasonic ES-LV9N Operating Instructions Manual page 21

Problem
The mode does not start.
The shaver cannot be
charged.
Action
Check that the AC adaptor is
connected to the self‑cleaning
recharger, and that the adaptor is
plugged in to a household outlet.
(See page 15.)
Confirm that the shaver is
properly attached to the self‑
cleaning recharger.
(See page 15.)
The Clean or Dry function may
not operate under extreme low
temperatures (approximately 0 °C
(32 °F) or lower).
Check if the STATUS lamp is
glowing. (See page 19.)
Gently wipe the main body rear
terminals and the charging
terminals of the self‑cleaning
recharger with a cloth or tissue
dampened with water.
Problem
Makes a loud sound.
►Shaver
Problem
The power switch does
not turn ON.
The clean lamp ( ) glows.
(It turns off in about
1 minute.)
Action
During cleaning:
The self‑cleaning recharger
makes a loud sound due to the
cleaning of the blades.
After cleaning:
The self‑cleaning recharger
makes a loud sound due to the
removal of water droplets in
order to speed drying.
The sound after cleaning is different
from the sound during cleaning. The
water level has dropped and it is
removing water droplets from the
blades after cleaning. This does not
indicate a problem.
Action
Unlock the switch lock.
(See page 14.)
Please clean the blades with the
self‑cleaning recharger or the
sonic vibration cleaning mode.
21