ABB COMMANDER 150 User Manual page 32

...4 CONFIGURATION MODE
...4.4 Ranges and Passwords (Level 4)
CNt HI
1. 0 0
cut. o FF
100. 0
PASSrd
Addr.
•1 Only displayed if enabled in the configuration level – see Section 4.3.3.
•2 Only available if the appropriate option board is fitted.
30
•1 Totalizer Count High
This frame determines the count corresponding to the
full-scale input.
•1 Cut-off
This frame sets the lowest flow value at which the
totalizer is to stop counting.
Setup Password
This password enables access to the setup level (levels
2).
0
•2 Modbus Address
This frame sets the Modbus address.
1
[0.000 and 99.999 pulses/second]
[In engineering units]
[0 to 9999]
[1 to 99]