Removing The Transport Locks; Hose And Cable Lengths - Siemens WM..U... Instruction And Installation Manual

Notes
Recess width of 60 cm required.
■
Only install the appliance
■
underneath a continuous worktop
that is securely connected to
adjacent cabinets.

Removing the transport locks

Caution!
Damage to the appliance
The appliance is secured for
■
transportation using transport locks.
If the transport locks are not
removed, the appliance may
become damaged when it is
operated.
Before using the appliance for the
first time, make sure that you
completely remove all four transport
locks. Keep the locks in a safe
place.
To prevent transport damage from
■
occurring if the appliance is moved
at a later date, you must refit the
transport locks before transporting
the appliance.
Keep the screws and sleeves in
Note:
a safe place.
Take the hoses out of the holders.
1.
Positioning and connecting
Unscrew and remove all four
2.
transport brace screws.
Remove the sleeves. To do this,
remove the mains cable from the
holders.
Fit the covers. Lock the covers firmly
3.
in place by applying pressure to the
snap-in hooks.

Hose and cable lengths

Left-hand connection
■
Right-hand connection
■
en
35