Panasonic WJ-FS316 Operating Instructions Manual page 31

MULTISCREEN OUT
1. Spot Picture
1. Press a SPOT/MULTISCREEN button so that the LED
of SPOT/MULTISCREEN button goes off.
2. Confirm that the LED on the VCR/CAM button is not lit.
If the LED is lit, press the VCR/CAM button so that the
VCR/CAM indicator goes off.
3. Press a CAMERA SELECT button to display a camera
picture on the monitor screen.
The LED on the pressed CAMERA SELECT button
lights up.
2. Spot Sequence
1. Press the SEQ button.
A sequence of single pictures is displayed in the order
and dwell time selected for the SPOT SEQ SETUP para-
meter in the SEQUENCE SETUP menu.
Note: Refer to the Sequence Setup on page 15 for
more details.
31
SPOT
MULTISCREEN
VCR
CAM
ENTRANCE
SEQ
Example of spot camera picture sequence
Camera 3 Picture
Camera 6 Picture
2. To cancel a sequence, press the respective CAMERA
SELECT button or MULTISCREEN SELECT button.
The selected camera picture appears in spot mode.