Configuring Master Control Element With Serial Interface Modules (Sim) - Siemens SICAM TM Installation Manual

4.2. Configuring Master Control Element with Serial
Interface Modules (SIM)
A master control element can be configured with up to 2 serial interface modules. The SIMs
and the associated patch plugs are installed on the main board of the master control element.
In order to perform this task the housing of the master control element must be opened.
SICAM TM, Installation
DC6-015-2.04, Edition 10.2014
Wiring Communication
ATTENTION
OBSERVE
PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
43