Pitney Bowes Relay 1000 Operator's Manual page 53

Troubleshooting and Error Messages • 5
Message
REMOVE ALL FROM
M & D
REMOVE SHEET
FROM A1
REPLACE FDR A1
TRAY
SHEETS REQUIRED
SYSTEM ERROR
CALL SERVICE
SV63176 RevB
There was a poor feed from manual feeder M.
1. If there is any material in manual feeder M,
remove it.
2. Open front cover D and remove any
material.
3. Close front cover D.
4. Reload and then start the run.
A sheet has failed to feed from sheet feeder A1.
1. Remove paper from A1.
2. Reload and then start the run.
Make sure that sheet feeder A1 is pushed fully
into position.
• Envelopes have been selected but no
sheet feeder was selected.
• The indicators for sheet feeder A1 and
envelopes will be red.
Press the sheet feeder selection button until the
required feeder is selected.
This is an unrecoverable system error. Call
Pitney Bowes for assistance.
Cause and Fix
5-9