Removing The Coin-Cell Battery; Prerequisites; Procedure - Dell Embedded Box PC 5000 Service Manual

Removing the coin-cell
battery
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
After working inside your Embedded Box PC, follow the steps in
working inside your Embedded Box
see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS setup
program's settings to default. It is recommended that you note the
BIOS setup program's settings before removing the coin-cell battery.

Prerequisites

1 Follow step 1 to step 6 in
2 Remove the

Procedure

1 Using a plasic scribe, push the battery-release lever away from the coin-
cell battery until the coin-cell battery pops up.
Before working inside your Embedded Box
"Removing the back
PCI/PCIe card (if installed).
PC. For more safety best practices,
www.dell.com/
cover".
PC.
After
81