Removing The Drives From The Hard-Drive Cage; Prerequisites; Procedure - Dell Embedded Box PC 5000 Service Manual

Removing the drives from the
hard-drive cage
WARNING: Before working inside your Embedded Box PC, read the
safety information that shipped with your Embedded Box PC and
follow the steps in
After working inside your Embedded Box PC, follow the steps in
working inside your Embedded Box
see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION: Hard drives/solid-state drives are fragile. Exercise care
when handling the Solid-state/hard drive.
CAUTION: To avoid data loss, do not remove the hard drive/solid-state
drive while the Embedded Box PC is in sleep or on state.

Prerequisites

Follow step 1 to step 6 in

Procedure

NOTE: Embedded Box PC is shipped with hard drive, solid-state drive, or
both, depending on the configuration ordered.
1 Remove the screws that secure the top drive to the hard-drive cage.
Before working inside your Embedded Box
"Removing the back
PC. For more safety best practices,
www.dell.com/
cover".
PC.
After
25