Change Password - SATO CL4NX Operator's Manual

4 Operation and Configuration

Change Password

System > Password > Change Password
Change the password.
You can enter 4 to 32 characters including alphabet (capital and small
letters), numbers and symbols.
The setting items are as follows:
• admin: This is the setting item for factory.
Strictly for SATO authorized personnel use.
• manager: The password for accessing the Service menu.
• level1: The password for accessing the Setting menu.
• rfid: This is the setting item for factory.
Strictly for SATO authorized personnel use.
Note
The admin, manager and rfid passwords are for factory and maintenance
personnel. You cannot change these passwords.
Reset Passwords
If you have forgotten the customized password, you can reset it back to the default password.
1. Power off the printer.
2. Press and release the
buttons simultaneously until the online/offline screen shows.
All the passwords are reset to default passwords.
Note
This key sequence allows users to access the settings menu with the default passwords as a temporary
solution.
After accessing the settings menu with the default password, you must customize the password again.
178
CL4NX/CL6NX Operator Manual
power button while pressing and holding the back button, and