SATO CL4NX Operator's Manual page 113

SSID
Interface > Network > Settings > Wi-Fi > SSID
Set the SSID.
The screen shows the Wi-Fi network detected by the printer.
Select the name of the Wi-Fi network you want to connect using the
/
buttons and press the right soft button to confirm.
To register a Wi-Fi network manually, press the left soft button and enter
the name of the network.
You can enter a maximum of thirty-two characters including alphabet
(upper case and lower case), numbers and symbols.
Note
SSID is editable if LAN or Wi-Fi Direct is active.
Hidden SSID
Interface > Network > Settings > Wi-Fi > Hidden SSID
Set the Hidden SSID (stealth function).
Shows if you have selected Infrastructure in the Mode menu.
The options are as follows:
• Enabled
• Disabled
Mode
Interface > Network > Settings > Wi-Fi > Mode
Set the communication method of the wireless LAN.
The options are as follows:
• Infrastructure
• Ad-hoc
4 Operation and Configuration
CL4NX/CL6NX Operator Manual
111