Replacing The Battery/Set The Date And Time - Panasonic DP-180 Network Scanner Operations

Problem Solving

Replacing the Battery/Set the Date and Time

The machine has an internal battery
(Product No.: CR2032) which maintains
the date and time.
In the event the battery requires
replacement, the following message will
be displayed.
REPLACE BATTERY
U90
When setting the Date and Time,
start from step 6.
● The service life of the battery is approximately 1 year under normal use.
NOTE
58
1
Turn the Power Switch on the
Left Side of the machine to the
OFF position.
If the Hard Disk Drive Unit
(DA-HD19) is installed, see
page 13)
CAUTION
Keep button batteries and small parts out of reach of children to prevent
chocking or poisoning. If a button battery is swallowed accidentally, get
medical treatment immediately.
Set the Date and Time continues steps 6 to 13.
6
If set in other
function mode.
10
09 KEY OPERATOR MODE
ENTER PASSWORD=_
3-digit
(See page 13)
2
Remove 1 Screw
Battery Holder
11
KEY OPR.MODE (00-31)
ENTER NO. OR ∨ ^
or
17 DATE & TIME