Panasonic KX-HDV430 Operating Instructions Manual page 103

One screw here
WALL MOUNTING TEMPLATE 2
(For mounting 2 or more KX-HDV20 units)
1. Drive the screws into the wall as indicated.
2. Hook the unit onto the screw heads.
Note:
Make sure to set the print size to correspond with the
size of this page. If the dimensions of the paper
output still deviate slightly from the measurements
indicated here, use the measurements indicated here.
One screw at either point
111 mm (4 ⅜ in)
One screw here
One screw at either point