3
General Functions
Powering on the Device
Press the
indicator will be blue.
Press and hold the
Activating the Device
If your device has not yet been activated, please follow the steps below:
1.
Dial * 2 2 8 9 0 from a telephone that is connected to the H258C to activate
the device.
2.
You will hear a confirmation tone or message once programming is complete.
Understanding the Indicators
The following table describes your device's status at any given time.
Icon
Voice mail
Battery
Signal Strength
Power
Making Calls
1.
Before making a call, make sure signal and signal strength indicators are lit up.
2.
Place a call by entering the desired telephone number, including the area code,
on your telephone.
button to power on the device. When the device is on, the power
button for 1 second to power off the device.
Indicator
Blinking Blue
Blue
Blinking Blue
Blinking Red
All Blue
Two Blue
One Blue
Blue
Status
New Message
Full Charge
Partial Charge
Low Charge
Strong
Moderate
Weak
The device is on
7