Special Recording; Pre Rec - JVC GY-HM600E Instructions Manual

5 Stop backup recording.
Select [STBY] in [Main Menu] B [System]
0
B [Record Set] B [Slot Mode] B [Backup
Rec] and press the Set button (R).
(A P111 [ Slot Mode ] )
You can also press the user button that is
0
assigned with "Backup Trig".
(A P95 [User Switch Set Item] )
Recording to slot B stops, and the card slot
0
mark of slot B turns white (unselected state).
The characters "BACKUP" changes back to
0
white.
The status indicator of slot B lights up in
0
green.
White
100min
50min
100min
50min
4030 20 10 0
Memo :
During backup recording, if the space of one
0
card runs out, recording stops only for the card
that is full.
When recording to both slots is stopped,
0
recording in the Regen mode will be enabled for
the card slot in which recording started.
When recording is started in the other slot while
0
recording to one slot, the clip being recorded is
split and simultaneous recording to the other
card starts.
When recording is stopped for either slot A or B
0
while recording to both slots, the clip on the slot
which is still recording is split.
Although the clips are separated during
0
recording the clips can be seamlessly joined by
arranging them on the timeline of the editing
software since they are recorded seamlessly.
Clip Cutter Trig cannot be performed during
0
backup recording.
(A P71 [Splitting the Clips Freely (Clip Cutter
Trig)] )
When [Slot Mode] is set to "Backup", [Rec
0
Mode] can only be set to "Normal".
(A P110 [ Rec Mode ] )
00: 00: 00.00
Jan 24,2012
12 :34 :56
5 . 6f t
ND 1 /64
AE 6
+
0
dB
F1.6
P 13000K 1/ 100

Special Recording

Besides the normal recording mode, five special
recording methods are available in this camera
recorder. They are Pre Rec, Clip Continuous,
Frame Rec, Interval Rec and Variable Frame.
Select a mode from [Record Set] B [Rec Mode].
Memo :
Set using [Main Menu] B [System] B [Record
0
Set] B [Rec Mode].
(A P110 [ Rec Mode ] )
When [Main Menu] B [System] B [Record
0
Set] B [Record Format] B [Format] is set to
"AVCHD", "Clip Continuous" cannot be
selected.
(A P109 [ Format ] )

Pre Rec

By setting the number of seconds in the [Pre Rec
0
Time], you can start recording video and audio
before actual recording starts based on the [Pre
Rec Time] setting.
When starting actual recording while the camera
0
recorder is in Recording Standby (STBYP)
mode, you can start recording a few seconds
earlier based on the [Pre Rec Time] setting.
Using Pre Rec allows you to record a complete
0
event without missing the initial scenes even if
you start the recording late.
Memo :
Pre Rec Time can be set to "5sec", "10sec", or
0
"15sec" in [Main Menu] B [System] B [Record
Set] B [Rec Mode] B [Pre Rec Time].
(A P110 [ Pre Rec Time ] )
Completed Clip
(Recorded video and audio)
Recording starts a
number of seconds
earlier based on the
[Pre Rec Time] setting
Press [REC]
(Recording starts)
.
Press [REC]
(Recording stops)
75