Tally Lamp; Warning Tone - JVC GY-HM600E Instructions Manual

Tally Lamp

The tally lamp start blinking when the remaining space on the SD card is running out during recording, or
when the battery power is running low.
Blinking Mode
Blinks slowly
(once every second)
Blinks quickly
(2 times per second)

Warning Tone

Warning tone is output from the monitor speaker and [x] terminal when the battery level is low.
0
Warning tone is also output when an error occurs in the camera recorder.
0
Memo :
You can specify whether to turn on the warning tone as well as setting the volume in [A/V Set] B [Audio
0
Set] B [Alarm Level].
(A P107 [ Alarm Level ] )
Remaining Battery Power/SD Card Space
Battery power is low
0
Remaining recording time on SD card is less than 3 minutes (during
0
recording)
Remaining recording time on SD card is zero (during recording)
0
Error on the camera recorder
0
135