Advertisement
4.2 Connecting to a power supply
Connect one end of the USB Y cable to your MediaQ's micro
USB port and the other end to the power adapter. Then plug
the power adapter into a power outlet.
After connecting to the power supply, your MediaQ automatically
powers on. The status indicator turns from blinking red to steady
blue.
Do not repeatedly connect and disconnect the power
supply. Remove the power supply only when you are
not going to use your MediaQ for a long time.
If your MediaQ is idle for 15 minutes, it enters standby
mode to decrease power consumption.
Status indicator
USB extended port
Connects to a USB storage device
8
Advertisement
