Basic Operation (Viewing); Image Display Using Internet Explorer - JVC VN-E4 Startup Manual

Basic Operation (Viewing)

Display of the current image is possible using Internet Explorer.
Additionally, continuous image display, one-shot image recording and bi-directional audio are possible by using the built-in
viewer in VN-E4.

Image Display Using Internet Explorer

Display of the current image is possible using Internet Explorer.
1.
Launch Internet Explorer on the PC.
2.
If the proxy setting in Internet Explorer is enabled, turn it off using the following procedures.
● Go to AToolsB - AInternet OptionsB - AConnectionsB - ALAN SettingB - AProxy ServerB and remove the check.
3.
Enter the URL of the image in the address field of Internet Explorer to display the image.
For example, to display image on Channel 1 of VN-E4 when the IP address for VN-E4 is 192.168.0.2, enter the following URL in
the Internet Explorer address field.
http://192.168.0.2:8009/api/video?input=1
4.
To display the video image on Channel 2, change the last numerical value to 2. Similarly, change this number
accordingly for Channels 3 and 4.
16
Remove the check.