Attaching Rack Mount Brackets - JVC VN-E4 Startup Manual

Attaching Rack Mount Brackets

The rack mount brackets (optional) can be used to install the unit to a rack. Request installation to the dealer of purchase.
T For details concerning the rack mount brackets, please consult the person in charge of professional equipment at your
nearest JVC-authorized service agent.
In case of 1 unit. (VN-BK10 rack mount bracket)
1.
Mount the side bracket on both left and right
(Remove 1 screw from each end of VN-E4. Fasten each end using 1 M3 screw and 2 M4 screws that are supplied with the rack mount bracket.)
2.
Fasten to the rack using the M5 screws supplied with the rack mount bracket
(2 M5 screws at each end)
2.
In case of 2 units. (VN-BK11 rack mount bracket)
1.
Mount the joint bracket to the connecting face of the unit
(Remove 3 screws from VN-E4. Connect with 3 M3 screws that are supplied with the rack mount bracket.)
2.
Fasten the 4 locations (top and bottom) using the M3 screws supplied with the rack mount bracket
(For joining the left and right units)
3.
Mount the side bracket on both left and right
(Remove 1 screw from each end of VN-E4. Fasten each end using 1 M3 screw and 2 M4 screws that are supplied with the
rack mount bracket.)
4.
Fasten to the rack using the M5 screws supplied with the rack mount bracket
(2 M5 screws at each end)
3.
4.
10
1.
2.
2.
1.
4.
2.
1.
3.