Supplementary Information - Panasonic CZ256ESMC2 Operation Manual

4. Supplementary Information

■ When connecting the Intelligent Controller via Internet, consider implementing network security
measures, such as a firewall.
■ Error Messages
Error
System configuration change!
(when logged in with Administrator
privileges)
Intelligent Controller is now
processing, please wait.
Please try later.
Communication error
Invalid user ID
Wrong password
All Stop!
All units were forced to stop.
Do not operate until unit operation
resumes.
Cause
The system configuration
of the Intelligent
Controller has changed.
The Intelligent Controller
is applying settings.
Access from the Web is
heavy.
The Intelligent Controller
was turned off while
connected, or a cable
was unplugged or the
network failure.
The entered user ID is
different from the user ID
registered on the
Intelligent Controller.
The entered password is
different from the
password registered on
the Intelligent Controller.
The external all stop input
is switched on for the
Intelligent Controller unit.
18
Screen Display and Operation
Remedy
This is a warning message.
Wait a moment
operation.
If configuring settings with the
Intelligent Controller, switch to a
non-settings screen (such as screen
1-n).
Wait a moment
operation.
Try the operation again.
Verify that the Intelligent Controller is
turned on, and that the network wiring
connections are correct.
Verify the user ID that was registered
to the Intelligent Controller.
Verify the password
registered to the Intelligent Controller.
When the external all stop input is
changed to OFF,
disappears. After changing to OFF,
wait for the message to disappear.
and resume
and resume
that was
the message