Table of Contents
Advertisement
y
RESET button
When this button is pressed, the counter display is reset to
0:00:00.
u
Display panel
Cassete insertion display
Recording display
VTR operation
Time mode
mode display
display
Operation mode displays
•
Operation mode
Playback
Recording
Still picture
Recording pause
Recording check
Fast forwarding
Rewinding
Cue
Review
Forward field advance
Reverse field advance
•
Error messages
An error code appears when trouble has occurred during
operation.
E-2:
Trouble in video cassette insertion area
E-3:
Trouble in video cassette tape loading area
E-4:
Trouble in cylinder area
E-5:
Trouble in tape transport area
d:
Formation of condensation (dew)
i
TIME MODE ( ,
) buttons
These buttons are used to select the recording and playback
time mode. Each time this is pressed, the time mode changes in
the following sequence:
9
L24
54
336
240
192
External timer recording mode display
Internal timer recording mode display
Tape remaining display
Summer time display
Date setting
display
Time/counter/picture quality mode
Memory stop mode display
Alarm search mode display
Auto repeat recording display
Recording lock display
Display
(L24H-336H) or
(3H/6H/9H)
Rec lamp lights.
Rec lamp lights.
Rec lamp lights.
or
(Flashing)
or
(Flashing)
72
96
168
120
o
COUNTER/SEARCH selector button
When this button is pressed, the display on the display panel
changes to time, counter, counter memory, alarm search and
number of repeat recording times. The M mark appears on the
display panel in the counter memory mode. When the tape is
fast forwarded or rewound in this mode, the counter will
automatically stop when 0:00:00 is approached. The AS mark
appears on the display panel in the alarm search mode. When
the tape is fast forwarded or rewound in this mode, the unit is
Time
display
automatically set to still-picture playback at the alarm recording
section. If the FF button or REW button is pressed during
playback with alarm search, the search will lock. (If this button is
pressed while the tape is being fast forwarded or rewound,
counter memory and alarm search will not function.)
"** PAS" is displayed during repeat recording.
"_ _PAS" appears at all other times.
(where " ** " denotes the number of repeat times)
p
REC display lamp
This lamp lights while recording, recording/pause or rec review
is in progress. It goes off when recording has finished.
a
ALARM display lamp
This remains lit while alarm recording is in progress. It flashes
when alarm recording ends. When the power is turned OFF and
ON again, it will go off.
s
Search dial/jog dial
Search (outside ring) dial
When the outside ring of the search dial is turned, the search
mode is established. The tape can now be reviewed or cued at
up to 27 times the normal playback speed. When the search dial
is set to the centre click-stop position, the still-picture playback
mode is established. Search is locked at 27 time the tape speed
when the dial is turned to the maximum position in the AS
(Alarm Search) mode.
Jog (inside ring) dial
When the search dial is set to the centre click-stop position, the
jog mode is established.
When the inside ring is turned, the tape speed can be varied
within a range of –1 to +1 times the normal playback speed.
When the turning is stopped, the still-picture playback mode is
established. The unit will go into the still-picture playback mode
when the JOG dial is turned during search lock in AS mode.
•
During search or jog playback, the picture may appear in black
and white or it may be distorted: this is normal and not
indicative of malfunctioning.
•
No sound is heard during search or jog playback.
For Swedish and Danish Customers
•
Aven om denna omkopplare är i " "-läge, gar fortfarande en
del av apparaten nätspänning.
•
Selv om denne omskifter er i "
apparatet stadig strøm.
7
" stilling, tiløres en del af
Advertisement
Table of Contents
