Canceling Registration/Re-registration
Canceling the Handset Registration
If you no longer need to use the handset or if you need to register the
handset to a different base unit of the same model, it may be necessary to
cancel the registration.
Only one handset can be canceled at a time near the base unit to which the
handset is currently registered.
Make sure the unit is not being used and the handset is lifted off the
base unit.
(MUTE/FUNCTION)
Press
Scroll to "Initial set" by pressing
Ñ
, and press
Scroll to "HS register" by pressing
Ñ
, and press
Scroll to "Deregistration" by pressing
Ö
Ñ
or
.
á.
Press
(3)(3)(5)
Press
registration memory.
•If you make a mistake, press
(HOLD/INTERCOM/CLEAR), and enter "335".
á
Press
(Ok key).
•A beep sounds and the registration memory will
be erased on both the handset and the base
unit.
•If 3 beeps sound, you entered a wrong code.
Enter "335", then press á (Ok key).
•To register the handset to another base unit of
the same model, start from step 5 on page 63.
•You can exit the programming mode any time by pressing (OFF)
•After canceling registration, the handset cannot be used. If you want to use it
again, register the handset to the base unit by performing steps 5 and 6 on page 63.
.
á
.
á
.
(DEL.) to delete the
Ö
or
Date and time
Initial set
--------------
Ö
or
Set answering
HS register
--------------
Registration
Deregistration
--------------
To deregister
press 3,3,5
:---
To deregister
press 3,3,5
:335
Handset [1]
Deregistered
.
=Ok
=Ok
Need help?
Do you have a question about the KX TG2382PW and is the answer not in the manual?
Questions and answers