Direct Commands - Panasonic KX TG2382PW Operating Instructions Manual

•The unit will announce the remaining recording time after playback, if it is less
than 5 minutes.
•If a call is being received during the remote operation, you will hear incoming
call tones (p. 48). To answer the call, press
•If you hear "Memory full" after playback, erase some, or all, of the messages
(see below).

Direct commands

NEW MESSAGE PLAYBACK
(4)
•Only new messages are
played back.
(5)
ALL MESSAGE PLAYBACK
•All messages are played back.
(1)
REPEAT (During playback)
•The current message is
repeated.
•If you press within 5 seconds
of playback, the previous
message will be played.
•You can also press Ü to
repeat a message.
(2)
SKIP (During playback)
•The current message is
skipped. The next message is
played.
•You can also press á to skip
a message.
(9)
STOP
•Operation is stopped
temporarily.
•To resume operation, enter a
direct command within 15
seconds, or the voice menu
will start (p. 52).
For assistance, please call: 1-800-211-PANA(7262) For assistance, please call: 1-800-211-PANA(7262)
or .
ERASING A SPECIFIC
(*)(4)
MESSAGE
(During playback)
•The current message is
erased.
•A short beep will sound
and the next message will
be played.
(*)(5)
ERASING ALL MESSAGES
•All recorded messages are
erased.
•A long beep sounds, and
"No messages" is heard.
(0) ANSWERING SYSTEM OFF
•"Answer off" is heard and
the Answering System is
turned off.
(8)
ANSWERING SYSTEM ON
•"Answer set" is heard and
the Answering System is
turned on.