DP-85 CHASSIS CENTERING MAGNET vs. BEAM FORM MAGNET
NOTE:
The Centering Magnet and Beam Form and Beam Alignment magnets are shown on the
right to avoid confusion when adjusting.
Figure 1 shows the Centering magnet. This magnet is normally made of metal and is
located up against the back side of the yoke assembly.
(Not down on the neck of the CRT)
CENTERING
MAGNET
Figure 1
Figure 2 shows the Beam Form and Alignment magnet. This magnet is normally made of
plastic and is located close to the CRT PWB on the neck of the CRT.
BEAM FORM &ALIGNMENT
MAGNET
ADJUSTMENT
ZERO
FIELD
SPACER
(NO ADJUSTMENT)
2-POLE
BEAM
Fimre 2
ALIGNMENT
MAGNET
PAGE
01-13