Hitachi 61HDX98B Service Manual page 20

ADJUSTING TV CONTROLS
PICTUREQUALITYCONTROLS
The Picture Quality menu contains all of theTV's video configuration controls.
To access the Picture Quality menu, press MENU on the remote control to go
to the main menu, then select Picture Quality.
PICTURE SETTINGS
The Picture Settings menu displays the controls for adjusting the way the
picture looks. The picture settings you specify apply to your current
mode.
Use
the
left and
right arrow buttons on the remote control to move the slider to the
desired position. Then select Exit when you are finished.
Your options under the Picture Settings menu are:
l
Contrast
Adjusts differences
between
the light and dark areas of the
picture.
l
Color Adjusts the richness of the color.
l
Tint Adjusts the balance
between
the red
and
green levels.
a
Brightness Adjusts the brightness of the picture.
l
Sharpness
Adjusts
the crispness of edges in the picture.
You can have six different picture settings: one for analog channels, one for
digital channels (including DIRECTV channels), and one for components
attached to INPUT 1, 2, 3, and 4 (FRONT).
To make settings for analog and digital channels:
1. Enter the "mode" for which you would like to apply the setting (for
example, press DTV/SAT).
2. Then press MENU.
3.
Select Picture Quality, and
then select
Picture
Settings to set picture settings
for digital terrestrial
and
DIRECTV channels.
To make settings for the components connected to INPUT 1, 2, 3, or 4
(FRONT), take the following steps:
1. Press INPUT on the remote control until the input that corresponds with
the component you want to make settings for appears in the channel
banner. (For example, if your DVD player is connected to INPI, stop
pressing INPUT when INPl appears.)
20