B
The EGPWS provides a single 600 ohm audio output which should be connected
to a un-switched/un-muted auxiliary audio input on the aircraft's audio control
panel. The audio output power level is set by programming the configuration mod-
ule.
2.2.3.3
Installation Procedure
A. Slide the unit into the rack and secure it.
B. Attach the harness to the front mating connector of the unit.
C. Attach coax cables J1 thru J10 to the front of the unit.
Refer to
Rev 3, August/2002
Figure 2-1
and notes.
10609I03.CDL
KMH 880/KTA 870
Page 2-5