Table of Contents
Advertisement
B
7.6 Initialize Config Module
This option sets the configuration module's strap data to default values. The user
must view both Strap Pages ( see Modify Strap Data ) to verify/modify the configura-
tion. The user may click the Cancel button at any time to end the initialization pro-
cess without actually writing to the configuration module.
When the Strap configuration is complete, click the OK button to save it to the con-
figuration module.
7.7 Bore Sight Top/Bottom Antenna
This option is used during initial installation of the TAS system to auto matically align
the top and bottom TAS antennas to the aircraft.
Rev 3, August/2002
Figure 6 Copy Binary File Window
10609I03.CDL
KMH 880/KTA 870
D-14
Advertisement
Table of Contents
