4.5
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Note: While re-assembling the TV, make sure that:
•
All cables are placed and connected in their original
position (see figure "Cable dressing").
•
EMC Shielding foam is intact.
•
LVDS connector (SSB) is secured with plastic clamp.
•
All "grounding" wires are re-connected:
–
Between metal speaker grid and frame (near the LED
panel).
–
Between the Mains Filter and the SSB Top Shielding
(see figure SSB Top shielding item 2a).
–
Between the SSB Top Shielding and the PSU (see
figure SSB Top shielding item 2b).
Figure 4-15 Grounding wire of metal speaker grid
Mechanical Instructions
F_15460_065.eps
120405
FTP2.4E AA
4.
EN 11