Getting Ready - Kenwood K25MB12 Instruction Manual

getting ready

This microwave is designed for home use only. It should not be used for commercial catering.
1. After unpacking your microwave, check that it has not been damaged whilst in the box. Make
sure there are no dents, and the door closes properly. A damaged microwave could allow
microwave energy to escape. Make sure that you have taken out all the packaging from inside
the microwave. Please dispose of the plastic wrappings / bags safely and keep out of the reach
of babies and young children.
2. Choose a flat work surface for your
microwave away from heat sources such
as radiators or fires and away from cold
areas. You should allow a 10cm space all
around the microwave and 30cm above so
that warm air can escape from the vents
during cooking. This microwave is not
designed to be built in.
3. Plug your microwave into a standard
household electrical socket (230 volt, 13
amp rated). Avoid using a socket that
also has an adaptor and other equipment
plugged in. Do not use a multi-adaptor.
4. Put the turntable support inside the
microwave and place the glass turntable
plate on top of the support. The turntable
support is shaped to sit securely on the
spindle. You must always use the turntable
plate and support whenever you use the
microwave.
5. To protect your work surface, we
recommend that you fix some non-slip
cushion buttons (not included) to the
underside of the microwave.
Remove the turntable plate and
turntable support before turning the
microwave upside down.
10
30cm
10cm
Underside View
ENTER TIMER CODE AMT COOK TIME
CLOCK DEF MEM G LOCK
10cm
popcorn baked potato pizza
beverage frozen dinner reheat
power timer cook
cook by defrost by speed
weight weight defrost
1 2 3
4 5 6
7 8 9
0
clock reset
start
stop