Changing The Jets - Miele CS 1012 Operating And Installation Instructions

Changing the jets

Disconnect the gas hob from the
electricity supply by switching off at
the socket and withdrawing the plug
or by disconnecting the mains fuse.
Turn off the gas supply.
To change the main jets
^ Take off the pan support, burner cap
n and the burner head o.
^ Using an M7 socket spanner
unscrew the main jet s.
^ Change the main jet.
Changing the small jets
The upper part of the appliance has to
be removed before the small jets can
be changed.
^ Remove burner cap n and burner
head o.
^ Pull the control knobs off.
^ Loosen screws t.
Conversion to another type of gas
^ Remove the upper section of the
appliance carefully. When doing this,
make sure you do not also pull out
the light unit for the display a
located underneath the upper
section. To release the unit, squeeze
together the two clamps b.
^ Using a small screwdriver, unscrew
small jet u in the gas fitting.
^ Pull out the jet with a pair of pliers.
^ Fit the correct jets securely (see jet
table).
^ Finally, secure the jets against
inadvertent loosening with sealing
wax.
47