Vpn Status Screen - ZyXEL Communications USG40 User Manual

This table describes the fields in the above screen.
Table 25 Dashboard > System Status
LABEL
System Uptime
Current Date/Time
VPN Status
SSL VPN Status
DHCP Table
Current Login User
Number of Login Users
Boot Status

6.2.3 VPN Status Screen

Click on VPN Status link to look at the VPN tunnels that are currently established. The following
screen will show.
Chapter 6 Dashboard
DESCRIPTION
This field displays how long the ZyWALL/USG has been running since it last
restarted or was turned on.
This field displays the current date and time in the ZyWALL/USG. The format is
yyyy-mm-dd hh:mm:ss. Click on the link to see the Date/Time screen where
you can make edits and changes to the date, time and time zone information.
Click on the link to look at the VPN tunnels that are currently established. See
Section 6.2.3 on page 166. Click on the VPN icon to go to the Zyxel VPN Client
product page at the Zyxel website.
The first number is the actual number of VPN tunnels up and the second number
is the maximum number of SSL VPN tunnels allowed.
Click this to look at the IP addresses currently assigned to the ZyWALL/USG's
DHCP clients and the IP addresses reserved for specific MAC addresses. See
Section 6.2.4 on page 168.
This field displays the user name used to log in to the current session, the
amount of reauthentication time remaining, and the amount of lease time
remaining.
This field displays the number of users currently logged in to the ZyWALL/USG.
Click the icon to pop-open a list of the users who are currently logged in to the
ZyWALL/USG.
This field displays details about the ZyWALL/USG's startup state.
OK - The ZyWALL/USG started up successfully.
Firmware update OK - A firmware update was successful.
Problematic configuration after firmware update - The application of the
configuration failed after a firmware upgrade.
System default configuration - The ZyWALL/USG successfully applied the
system default configuration. This occurs when the ZyWALL/USG starts for the
first time or you intentionally reset the ZyWALL/USG to the system default
settings.
Fallback to lastgood configuration - The ZyWALL/USG was unable to apply
the startup-config.conf configuration file and fell back to the lastgood.conf
configuration file.
Fallback to system default configuration - The ZyWALL/USG was unable to
apply the lastgood.conf configuration file and fell back to the system default
configuration file (system-default.conf).
Booting in progress - The ZyWALL/USG is still applying the system
configuration.
ZyWALL/USG Series User's Guide
166