Firmware Update - TrekStor MovieStation Antarius User Manual

The time required for copying varies depending on the number and size of the files/folders
i
to be copied.
In the copying mode, all files are displayed, even those whose playback is not supported by the
i
MovieStation and which otherwise would be hidden.
a) Switch to the copying mode.
b) Select the desired media source from which you would like to copy by pressing the
or button in the "S
K
After selecting the media source, the right "D
for selecting the target drive.
c) Next, select the desired target drive to which you would like to copy by pressing the
button in the "D
After you have confirmed the target drive, you can select folders for "S
"D " from which and to which the copying is to be carried out.
ESTINATION
d) Use the or
L K
"SELECT" button to mark the files and folders to be copied. To cancel the marking on an
already marked file or folder, press the "SELECT" button again.
To open a folder and thereby go one level deeper, press the
i
a higher level, select "/../".
You can mark a maximum of 8 files or folders for one copying process.
i
e) Press the button to switch to the "D
J
specify the folder into which the files are to be copied. To open a folder and thereby
go one level deeper, press the
To create a new folder for the content to be copied on the target drive, select "new-
i
Directory". You can assign a name for the folder using the text input function.
f ) Press the button if the target folder into which the selected files or folders are to be
J
copied is marked.
g) Confirm the inquiry at the start of the copying process with "Y
return to the selection screen.
h) A status display will inform you of the current progress during the copy procedure. To
cancel the copy procedure, press the
already been completely copied can be found on the target drive.
No other action can be performed during the copying process.
i
When the copying process has been completed, you can start another copying process or
open the "B ".
rOwSEr

8) Firmware update

The firmware is the program responsible for the control of your MovieStation. A firmware update
serves to transfer firmware upgrades to your MovieStation. If you should encounter any problems
with your MovieStation, please make sure that you have installed the latest firmware version.
User settings are deleted during a firmware update.
i
In some cases, the display via HDMI is not correct during a firmware update. Therefore please
a
make sure that your MovieStation is also connected to your television via the composite video
connection during the firmware update, not only via HDMI , and select the composite video
input as the active input of your television.
a) Download the firmware (ZIP file) from the TrekStor website www.trekstor.de and unzip it
in the folder of your choice.
b) For the firmware update, please also observe the update instructions that come
with the update.
c) Copy the unzipped software (this may consist of several files) to the main directory of a
USB data storage device.
En
42
" area and confirm your selection by pressing the
OUrCE
" area and confirm your selection by pressing the
ESTINATION
button to specify the folder or file that you wish to copy. Press the
button.
z
" area will automatically be activated
ESTINATION
" area. Use the
ESTINATION
button. Only the files and folders that have
µ
z
L
button.
z
" and
OUrCE
button. To go back to
z
or button to
L K
". If you select "C
ES ANCEL
L
button.
or
K
", you