Rf Cable Holder; Removing The Rf Holder; Installing The Rf Holder - Dell Latitude 14 Rugged - 5414 Owner's Manual

5. Install the:
a. base cover
b. optical drive
c. hard drive
d. battery
6. Follow the procedure in

RF cable holder

Removing the RF holder

1. Follow the procedure in
2. Remove the:
a. battery
b. hard drive
c. optical drive
d. base cover
e. GPS board
f. WLAN card
g. docking board
3. To remove the RF holder:
a. Unroute the antenna cables from the cable routing clips [1].
b. Remove the screw that secures the RF holder to the computer [2] .
c. Lift and remove the RF holder from the computer [3] .

Installing the RF holder

1. Place the RF holder on the computer.
2. Install the screws that secure the RF holder to the computer.
3. Connect the antenna cables.
4. Route the antenna cables.
5. Install the:
a. docking board
b. WLAN card
After working inside your
Before working inside your
computer.
computer.
35