To Read Password Or Address; To Write New Password Or Address - Sanyo KA-PN04 Owner's Manual

To read Password or Address

1
Enter the service mode. (See a previous page)
2
Send a command (ASCII) of table1 to the Network Board.
3
The Network Board sends a return of table1 to your computer.
4
Exit the service mode.
Item to read
Password
IP Address
Subnet Mask
Default Gateway "R_G" + [CR]
DNS

To write New Password or Address

1
Enter the service mode. (See a previous page)
2
Send a command (ASCII) of table2 to the Network Board.
3
The Network Board sends a return of table2 to your computer.
4
Exit the service mode.
Item to write
Password
IP Address
Subnet Mask
Default Gateway "W_GXXXXXXXXXXXX" + [CR] "XXXXXXXXXXXX" + [CR]
DNS
Example: New IP Address
"192.168.0.2"
Input of the command must be completed
we recommend input with
Table1
Command
(to Network Board)
"R_P" + [CR]
"R_I" + [CR]
"R_N" + [CR]
"R_D" + [CR]
"_": Space
Table2
Command
(to Network Board)
"W_PXXXX" + [CR]
"W_IXXXXXXXXXXXX" + [CR]
"W_NXXXXXXXXXXXX" + [CR] "XXXXXXXXXXXX" + [CR]
"W_DXXXXXXXXXXXX" + [CR] "XXXXXXXXXXXX" + [CR]
"_": Space
"XXXX": New Password (Must be typed 4 digits)
"XXXXXXXXXXXX": New Address (Must be typed 12 digits)
"W_I192168000002"
within 3 seconds
"Copy & Paste"
for saving your time.
Return
(to Computer)
"Password" + [CR]
"IP Address" + [CR]
"Subnet Mask" + [CR]
"Default Gateway" + [CR]
"DNS" + [CR]
Return
(to Computer)
"XXXX" + [CR]
"XXXXXXXXXXXX" + [CR]
. If the command has a long wording,
Service Setting
43