If An External Sensor Is Connected - Panasonic KX-TDA200 User Manual

Hybrid ip pbx
Hide thumbs Also See for KX-TDA200:
Table of Contents

Advertisement

1.9.2 If an External Sensor is Connected

There are two kinds of sensors. One is that the pre-recorded message is broadcasted to a specified
paged group. The other is that a call with the pre-recorded message or alarm tone is sent to the
specified extension or outside party (your mobile phone, etc.). The pre-recorded message for
emergency is also sent to all extensions.
To answer from any extension
PT/SLT/PS
During ringing
Off-hook.
To answer on the outside line
PT/SLT/PS
During ringing
Off-hook.
If you do not answer the alarm tone within a specified time period, it will automatically stop
ringing.
If you are engaged in a call when the external sensor sends an alarm, the alarm will start
ringing after you finish the call.
If the outside party who is sent the alarm does not answer or enters the wrong password,
the external sensor will re-sent the alarm at the pre-programmed times.
User Manual
You hear an alarm tone
or the pre-recorded
message.
You hear an alarm tone
or the pre-recorded
message.
On-hook.
password
Enter password
(max. 10 digits).
If you enter a wrong
password, you can hear
an alarm tone and then
re-enter the correct
password.
Operation
On-hook.
103

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda100

Table of Contents