Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
12.5 AMP
DEMOLITION
HAMMER
REV 14j
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2014 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Chisel sold separately.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Advertisement
Table of Contents
Related Manuals for Chicago Electric 62397
Summary of Contents for Chicago Electric 62397
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 62397... -
Page 3: Electrical Safety
Power tools are dangerous in the hands of untrained users. Item 62397 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Page 4 For technical questions, please call 1-888-866-5797. Item 62397...
-
Page 5: Vibration Safety
6. Let the tool do the work. advice as soon as possible. 7. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. Item 62397 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Page 6 For technical questions, please call 1-888-866-5797. Item 62397...
-
Page 7: Extension Cords
Risk of Electric Shock. Properly connect power cord to appropriate outlet. Amperes WARNING marking concerning Risk of Hearing Loss. n 0 xxxx/min. No Load Revolutions per Minute (RPM) Wear hearing protection. Item 62397 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Specifications
Specifications Electrical Input 120 VAC / 60 Hz / 12.5 A Blows Per Minute 1900 BPM Chisels Sold Separately Chuck SDS MAX Type 26Zy E252823 Page 8 For technical questions, please call 1-888-866-5797. Item 62397... -
Page 9: Setup
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 14. Functions Switch Main Handle Chuck Flat Chisel Figure A Side Handle Indicator Light Figure B Item 62397 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Operation
7. To prevent accidents, turn off the tool and disconnect its power supply after use. Clean, then store the tool indoors out of children’s reach. Page 10 For technical questions, please call 1-888-866-5797. Item 62397... -
Page 11: Maintenance
NOTE: The Demolition Hammer will cease operation once Carbon Brushes are worn. When the red Indicator Light (54) is on, have a qualified service technician replace the Carbon Brushes. See Figure B on page 9 Item 62397 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Troubleshooting
3. Wear ANSI-approved safety goggles and vents. NIOSH-approved dust mask/respirator while blowing dust out of motor using compressed air. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Page 12 For technical questions, please call 1-888-866-5797. Item 62397... - Page 13 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 62397 For technical questions, please call 1-888-866-5797. Page 13...
-
Page 14: Parts List And Diagram
Helical Spring Cylinder Pan Head Screws Metal Contact Plate Piston Pin Φ10×38 M6×50 (Φ18) Tapping Screw Piston O-Ring φ16×Φ3 St3.5x16 Connecting Rod Ass’y Speed Adjuster Metal Insert Impact Body Switch Page 14 For technical questions, please call 1-888-866-5797. Item 62397... - Page 15 Assembly Diagram 13 13A 14 15 94 95 97 98 61 50 67 68 Item 62397 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 62397 and is the answer not in the manual?
Questions and answers