List Of Information; On/Off - Toshiba GRE110 Instruction Manual

4. List of Information

List of Information
INF Description
Standard Information numbers in monitor direction
System Function
0 End of General Interrogation
0 Time Synchronization
2 Reset FCB
3 Reset CU
4 Start/Restart
5 Power On
Status Indications
16 Auto-recloser active
17 Teleprotection active
18 Protection active
19 LED reset
20 Monitor direction blocked
21 Test mode
22 Local parameter Setting
23 Characteristic1
24 Characteristic2
25 Characteristic3
26 Characteristic4
27 Auxiliary input1
28 Auxiliary input2
29 Auxiliary input3
30 Auxiliary input4
Supervision Indications
32 Measurand supervision I
33 Measurand supervision V
Phase sequence supervision
35
36 Trip circuit supervision
37 I>>backup operation
38 VT fuse failure
39 Teleprotection disturbed
46 Group warning
47 Group alarm
Earth Fault Indications
48 Earth Fault L1
49 Earth Fault L2
50 Earth Fault L3
51 Earth Fault Fwd
52 Earth Fault Rev
Contents
Transmission completion of GI items.
Time Synchronization ACK.
Reset FCB(toggle bit) ACK
Reset CU ACK
Relay start/restart
Relay power on.
If it is possible to use auto-recloser, this item is set active, if
impossible, inactive.
If protection using telecommunication is available, this item is
set to active. If not, set to inactive.
If the protection is available, this item is set to active. If not,
set to inactive.
Reset of latched LEDs
Block the 103 transmission from a relay to control system.
IECBLK: "Blocked" setting.
Transmission of testmode situation froma relay to control
system. IECTST: "ON" setting.
When a setting change has done at the local, the event is
sent to control system.
Setting group 1 active
Setting group 2 active
Setting group 3 active
Setting group 4 active
User specified signal 1 (Signal specified by IECB1: ON) (*1)
User specified signal 2 (Signal specified by IECB2: ON) (*1)
User specified signal 3 (Signal specified by IECB3: ON) (*1)
User specified signal 4 (Signal specified by IECB4: ON) (*1)
Zero sequence current supervision
Zero sequence voltage supervision
Negative sequence voltage supevision
Output circuit supervision
VT failure
CF(Communication system Fail) supervision
Only alarming
Trip blocking and alarming
A phase earth fault (*2)
B phase earth fault (*2)
C phase earth fault (*2)
Earth fault forward (*2)
Earth fault reverse (*2)
 292 
6 F 2 T 0 1 7 2
Type
GI COT FUN
ID
-- 8 10 255
-- 6 8 255
-- 5 3 160
-- 5 4 160
-- 5 5 160
Not supported
1, 7, 9, 12,
GI 1 160
20, 21
Not supported
1, 7, 9, 12,
GI 1 160
20, 21
1, 7, 11, 12,
-- 1 160
20, 21
GI 1 9, 11 160
GI 1 9, 11 160
Not supported
1, 7, 9, 11,
GI 1 160
12, 20, 21
1, 7, 9, 11,
GI 1 160
12, 20, 21
Not supported
Not supported
GI 1 1, 7, 9 160
GI 1 1, 7, 9 160
GI 1 1, 7, 9 160
GI 1 1, 7, 9 160
GI 1 1, 7, 9 160
Not supported
Not supported
GI 1 1, 7, 9 160
Not supported
Not supported
Not supported
GI 1 1, 7, 9 160
GI 1 1, 7, 9 160
GI 1 1, 7, 9 160
GI 1 1, 7, 9 160
GI 1 1, 7, 9 160
Not supported
Not supported