Samsung NX58K7850S Installation Manual
Hide thumbs Also See for NX58K7850S:

Advertisement

Gas Range
Installation manual
NX58K7850S*

Advertisement

Table of Contents
loading

Summary of Contents for Samsung NX58K7850S

  • Page 1 Gas Range Installation manual NX58K7850S*...
  • Page 2 ANTI-TIP DEVICE WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal WARNING injury or death. • DO NOT store or use gasoline or other flammable vapors and ALL RANGES CAN TIP, RESULTING IN PERSONAL INJURY. liquids in the vicinity of this or any other appliance.
  • Page 3: Table Of Contents

    Contents Before you begin ABOUT THIS MANUAL Before you begin READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY. Important safety information Important note to the installer Gas range components • Read all instructions contained in these installation instructions before installing the range. Overview •...
  • Page 4: Important Safety Information

    Important safety information Important safety information READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE State of California Proposition 65 Warning (US only) WARNING : This product contains chemicals known to the State of California to • All electrical and gas equipment with moving parts can be dangerous. Please read the important safety instructions for this appliance in this manual.
  • Page 5 • Do not store any object of interest to children on the cooktop or backguard Fire safety of the range. Children climbing on the range to reach items could be killed or seriously injured. WARNING • Do not operate the range if the range or any part of the range is damaged, To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the malfunctioning, or missing parts.
  • Page 6 Important safety information Gas safety Electrical and grounding safety WARNING WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the following precautions. following precautions.
  • Page 7 Installation safety • Make sure your range is correctly installed and adjusted by a qualified service technician or installer for the type of gas (natural or LP) you will use. For your range to utilize LP gas, the installer must replace the 5 surface burner WARNING orifices and 2 oven orifices with the provided LP orifice set, and reverse To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the...
  • Page 8 Important safety information Location safety Cooktop safety WARNING WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the following precautions. following precautions. •...
  • Page 9 • Make sure cookware handles are turned to the side or rear of the cooktop, but Oven safety not over other surface burners. • Stand away from the range while frying. WARNING • Always heat frying oils slowly, and watch as they heat. If you are frying foods To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the at high heat, carefully watch during the cooking process.
  • Page 10 Important safety information Storage drawer safety Self-cleaning oven safety WARNING WARNING To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the To reduce the risk of fire, electric shock, personal injuries, and/or death, obey the following precautions. following precautions.
  • Page 11: Gas Range Components

    Gas range components Overview 232.0lb (105kg) NX58K7850S* 46 3/8in (118.3cm) 26in (66cm) 29 15/16in (76cm) BTU Ratings 01 Left-Front: 15,000 BTU 02 Left-Rear: 9,500 BTU 03 Center: 9,500 BTU 04 Right-Rear: 5,000 BTU 05 Right-Front: 18,000 BTU 01 Display 02 Surface burner...
  • Page 12: Gas Range Specifications

    Installation requirements Gas range specifications Location requirements MODEL NX58K7850S* Clearances and dimensions DESCRIPTION Gas Free-Standing Range NOTE OVERALL DIMENSIONS in (W) x 46 in (H) x 26 in (D) For OTR over Gas Stove, please follow local GAS CODE. 760 mm (W) x 1183 mm (H) x 660 mm (D) BEFORE YOU BEGIN to install this appliance, refer to the following information, dimensions, and clearances.
  • Page 13 of not less than 1/4" between the hood and the underside of the combustible material or metal cabinet. The hood must be at least as wide as the appliance and centered over the appliance. Clearance between the cooking surface and the ventilation hood surface must never be less than 24 inches.
  • Page 14: Gas Requirements

    Installation requirements Gas requirements Special gas requirements (gas models sold in massachusetts) Provide adequate gas supply COMMONWEALTH OF MASSACHUSETTS REQUIREMENTS: This range is designed to operate at a pressure of 5 in (13 cm) of water column on WARNING natural gas or 10 in (25 cm) of water column on LP gas (propane or butane). Gas leaks may occur in your system, creating a dangerous situation.
  • Page 15 • Wiring diagram is located on the back of the range. (Inside of the cover back • Do not, under any circumstances, cut, modify, remove, or otherwise defeat the wire) grounding (third) prong from the power cord. If the plug and the outlet do not •...
  • Page 16: Tools And Materials

    NOTE If you need an accessory marked with an * (asterisk), please contact the Samsung Call Center using the phone number listed on the last page of this manual or visit our on-line parts web site at www.samsungparts.com.
  • Page 17 Parts needed Tools needed Gas line shut-off Flexible metal Flare union adapter Flare union adapter Flat-blade Phillips screwdriver Open-end or Pipe wrench (2) valve appliance connector ¾ in or ½ in (NPT) x ½ in (NPT) x ½ in screwdriver adjustable wrench ½...
  • Page 18: Installation Instructions

    Installation instructions Installation instructions Installing your gas range Step 2. Connect the range to gas supply Shut off the main gas supply valve before disconnecting the old range and leave it off until the new hookup has been completed. Don’t forget to relight the pilot on IMPORTANT: other gas appliances when you turn the gas back on.
  • Page 19 Install male 0.5-in (1.3-mm) flare union adapter to the 0.5-in (1.3-mm) NPT Flexible connector hookup internal thread at the regulator inlet. Use a backup wrench on the regulator Installer: Inform the consumer of the location of the gas shut-off valve. fitting to avoid damage.
  • Page 20 All new gas ranges are shipped from the factory set up to use natural gas. Any WARNING Samsung gas range can be converted to use LP gas. Refer to page 78 in the User To reduce the risk of tipping, the appliance must be secured by properly installing Manual to contact a qualified service technician.
  • Page 21 Plug in the power cord. Make sure the *NOTE: To install the Anti- outlet meets local or national electrical Anti-Tip Tip bracket, release the codes as referenced on pages 20 ~ 22. bracket leveling leg. Slide the range into place. A minimum clearance of 21/32”...
  • Page 22 Installation instructions If range is next to or between cabinets, Precise Simmer Burner (RR) NOTE make sure the cooktop (without the The caps on Precise simmer burner surface burner grates) is level with the (RR) and inside Dual Burner (RF) can be countertops.
  • Page 23 Step 8. Check the ignition of surface burners and oven burners To start the bake burners Check the operation of all cooktop and oven burners after the range has been installed and assembled, gas supply lines have been carefully checked for leaks, and electrical power cord has been plugged in.
  • Page 24 Installation instructions Checking the flame quality: Step 9. Final installation checklist All combustion flames need to be visually checked to determine their flame You have just completed installing your range. Make sure all controls are in the off quality. position and the flow of ventilation air to the range is unobstructed. The following Soft blue flames—Normal for natural is a checklist to confirm your range is safely installed and ready for operation.
  • Page 25: Adjusting The Oven Burner Air Adjustment Shutters

    Adjusting the oven burner air adjustment shutters The shutters are located at the base of the burner manifolds near the back oven wall. All oven burners have an air adjustment To adjust the shutter, loosen the locking shutter. The purpose of the shutter is to screw and rotate the shutter towards the regulate the flow of air to the flames.
  • Page 26 Installation instructions To adjust flame low setting Identify which burner is exhibiting too high or too low of simmer rate via manifold panel graphics. Rotate a knob to "LO" position and remove the knob from the valve shaft while the flame is lit. Simmer Set Screw Carefully push the screw driver into the C chanel of the valve, until it hits...
  • Page 27 Memo...
  • Page 28 How-to Videos and Live Shows * Requires reader to be installed on your smartphone Please be advised that the Samsung warranty does NOT cover service calls to explain product operation, correct improper installation, or perform normal cleaning or maintenance. QUESTIONS OR COMMENTS?

Table of Contents