Table of Contents
Advertisement
4
5
3
Figure 5.1 Connecting the USB stick to
the Robot Vacuum Cleaner
Software updates
5
SOFTWARE UPDATES
The software of the Kobold VR200 Robot Vacuum Cleaner is subject to continuous
further development and optimisation. In order for you to benefit from these
improvements, the latest software versions are available on our homepage.
www.vorwerk-kobold.com
Subscribe to our newsletter to be informed with regular news and updates.
Naturally you can also have new software versions installed by our Service
Centre. For locations and opening hours, please visit us on the internet or call
our customer hotline (see Section "9 Service" on page 62).
SOFTWARE-UPDATE VR200 USING A USB STICK
Your Robot Vacuum Cleaner has a micro-USB port. This micro-USB port is
2
located under the dust compartment cover of the Robot Vacuum Cleaner
directly next to the dust container.
•
Take a USB stick (not supplied).
1
•
Create a folder named "RobotData".
•
Download the software file from our homepage (see above) and save it in the
folder.
•
Only use the supplied USB adapter (on-the-go version).
•
Remove the rubber plug.
•
Connect your USB stick
port
and the supplied USB adapter
2
.
3
to the Robot Vacuum Cleaner using the micro-USB
5
.
4
51
EN
2
1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KOBOLD VR200 and is the answer not in the manual?
Questions and answers