PROFILE-100 AXIAL EXTRACTOR FANS Suitable for bathroom applications Thank you for placing your confidence in EnviroVent by buying this product. It has been manufactured following current technical safety regulations, production and quality standards as laid down by the international Quality Standard ISO 9001.
Page 3
INSTALLATION: PROFILE –100 Ø 105 mm Fig.1...
Page 6
Fig.6 Fig.8 Fig.7 Fig.9 t min t min 2/20 2/20 % Hr % Hr 60/90 60/90...
Page 7
3 – Connection terminals 4 – Outlet 5 – Cable entry point The PROFILE-100 is suitable for panel, ceiling or wall mounting (for wall mounting applications using EnviroVent wall kit) (fig. 2). Drill a hole in chosen position in the panel, ceiling or wall of size Ø105mm in diameter.
Page 8
The PROFILE is an extractor fan designed for a single-phase supply, with voltage and frequency as indicated on the rating plate of the unit. The units are manufactured with double insulation (Class ll) and therefore do not require an earth connection. •...
Page 9
- In order to ensure correct measurement of humidity levels, the fan must be installed in an area where there is good air circulation. - Ensure that the fan is inside the room that it is to be installed in when setting the humidity level.
If you detect any fault, contact EnviroVent on 01423 810810. Thank you for choosing EnviroVent - the fastest growing ventilation company in the UK. And remember, if you have any problems please call our dedicated Technical...
Page 11
GUARANTEE The PROFILE-100 range products are covered by a two year guarantee, subject to the specified maintenance stated within this booklet. In the event of any failure of the fan within two years of supply- excluding only wilful or careless damage – we will exchange the fan free of charge.
Page 12
EnviroVent Ltd EnviroVent House Hornbeam Business Park Harrogate Hg2 8PA 01423 810 810 info@envirovent.com www.envirovent.com Ref. 9023007403...
Need help?
Do you have a question about the PROFILE-100 and is the answer not in the manual?
Questions and answers