Software Version Checking; Restore Initial Setting - BITMAIN AntMiner S7 Manual

AntMiner Manual
Last updated: 2/1/2016
Page 11 of 11

7.3 Software Version Checking

You can check which version of the software you are currently running on the
'System->Overview' page. 'File System version' displays the date of the firmware your miner use.
In the example below, the miner is using 20150915 firmware.

7.4 Restore Initial Setting

There is a 'Reset' button on the right hand side of the Ethernet port, next to the green and red
LED light. Power on miner and let it run for 5 minutes, then press and hold the reset button for 10
seconds in order to restore to the default settings and reboot. The red LED will flash once every
15 seconds automatically if the reset is operated successfully.
Page 11 / 11