Table of Contents
Advertisement
Maintenance
■ Type A - Bulb type
Tail
Back up
■ Type B - LED type
Back up
5. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
6. Remove the bulb by pulling it out.
7. Insert a new bulb by inserting it
into the socket.
7-86
8. Install the light assembly to the
trunk.
9. Reinstall the nuts and connector
and then the trunk lid cover by
pushing in the screw.
Stop/Tail light (Type B)
If the LED light does not operate,
have the vehicle checked by an
OAD075069N
authorized HYUNDAI dealer.
OAD075070N
High mounted stop light
replacement
1. Open the trunk.
2. Remove the socket by turning it
counterclockwise until the tabs on
the socket align with the slots.
OAD075041
OAD075042
- Quick Links:
- User Settings Mode
- Check Tire Pressure
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Elantra 2017 and is the answer not in the manual?
Questions and answers
How do I reset the digital mph dash back to numbers it says speed on
To reset the digital speedometer on a 2017 Hyundai Elantra, press and hold the RESET button for more than 1 second while the digital speedometer is displayed.
This answer is automatically generated