Backup Lamp; High Mounted Stop Light Replacement - Hyundai IONIQ ELECTRIC 2019 Manual

Maintenance

Backup lamp

1. Turn off the vehicle.
2. Open the tailgate.
3. Remove the service cover using a
flat-blade screwdriver.
7-62
Backup lamp
4. Remove the socket from the
OAEE076025
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
5. Remove the bulb by pulling it
straight out.
6. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
7. Install the socket into the assem-
bly by aligning the tabs on the
socket with the slots in the assem-
bly. Push the socket into the
assembly and turn the socket
clockwise.
8. Reinstall the service cover.
High Mounted Stop Light
Replacement
OAEE076038
1. Open the liftgate.
2. Gently remove the cover of the lift-
gate trim.
3. Remove the spoiler plug hole.
4. Disconnect the electrical connec-
tor.
5. Loosen the mounting bolts and
remove the spoiler.
6. Remove the high mounted stop
light assembly after disconnecting
the connector.
7. Reinstall a new light assembly in
the reverse order of removal.
OAEE076023