Timeout - Canon imageRUNNER 2545i Printer Manual

Timeout

On (5 to 300sec), Off; 15sec
The Timeout setting enables the machine to discard a print job that remains in the machine's
memory after a specified period of time.
This setting is useful when the data for the current job has some error and prevents the
machine from performing further printing. In this case, the machine will not receive other print
commands because it performs printing in chronological order (jobs are printed in the order
they are received).
If the Timeout setting is enabled, the current job is discarded automatically after the specified
period of time. For example, if the Timeout is enabled at '20 sec', the data for the current job
will be erased from the machine's memory 20 seconds after the machine starts processing
the data.
4
If [Off] is selected, the machine will not discard jobs automatically.
IMPORTANT
• This setting applies only for PCL and PS data.
• If a job that consists of a large amount of data is sent from a computer, the function
may cause the machine to end the print job before all of the data is received. In this
case, set a longer timeout period (in seconds).
• If [Off] is selected, you will not be able to make copies until print jobs that use the
Staple mode are complete.
NOTE
When a job is being processed, the Processing/Data indicator blinks on the control
panel.
4-14
Settings Menu