Settings For The Entire Rc-202 (System Settings); Adjusting The Output Volume Of The Output Jacks; And The Headphones; Restoring The Factory Settings (Factory Reset) - Boss RC-202 Owner's Manual

Settings for the Entire RC-202 (System Settings)

Settings that apply to the entire RC-202, such as auto-off (automatic power-off ), USB, and MIDI, are called "system settings. "
1.
Press the [SETUP] (EXIT) button.
2.
Press a button to select the category of settings that you want to make.
I/O
Make settings related to input
and output.
USB
Make settings related to USB.
3.
Press the [VALUE] knob to select a parameter, and turn the [VALUE] knob to edit the value.
Reference
For details on the parameters, refer to "Parameter Guide" (PDF).
4.
Press the [SETUP] (EXIT) button to return to the Play screen.
Adjusting the Output Volume of the OUTPUT Jacks and the Headphones
Here's how to adjust the output volume of the RC-202.
1.
Press the [SETUP] (EXIT) button.
2.
Press the [BEAT] (I/O) button.
3.
Press the [VALUE] knob to select the parameter; then turn the [VALUE] knob to adjust the value.
Parameter Value
0–100
OLV
0–100
PLV
4.
Press the [SETUP] (EXIT) button to return to the Play screen.

Restoring the Factory Settings (Factory Reset)

"Factory reset" is an operation that returns the
RC-202's system settings to their factory-set state.
Factory reset can return the system settings to their
factory-set state and can also initialize all banks.
* The RC-202 contains demo data (bank 8).
If you execute factory reset "ALL" or "B8,"
the demo data is also erased, and cannot be
recovered. Before you proceed, make a backup
as described in "Backing up to your computer"
(p. 15).
1.
Long-press the [SETUP] (EXIT) button and
[MEMORY] button simultaneously.
The Factory Reset range setting screen appears.
MIDI
Make settings related to MIDI.
GENERAL
Make settings such as auto-off.
Explanation
The output volume of the OUTPUT jacks will be adjusted.
The volume of the headphones will be adjusted.
2.
Use the [VALUE] knob to specify the range
of settings that you want to return to their
factory-set state.
Value Explanation
The system settings will be returned to
their factory-set state, and all banks will be
ALL
erased (initialized)
The system settings will be returned to their
SYS
factory-set state
The selected bank will be erased (initialized)
B1–B8
* If you execute "ALL" or "B1–B8, " the RC-202's
banks will be initialized, and cannot be returned
to their previous state.
3.
If you want to proceed with the factory reset,
press the [WRITE] button.
When the factory reset is completed, you return to
the Play screen.
13